Tripp Lite SMX1200XLHG SmartPro 230V 1kVA 750W Medical-Grade Line-Interactive Tower UPS with 6 Outlets, Full Isolation, Expandable Runtime

Tripp Lite’s SMX1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 27.5 minutes of runtime for a half load, or 11 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX1200XLHG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps. This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15 cm (6 in.) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules. The SMX1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite’s included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure. Application Usage This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMX1200XLHG in this type of application will void the battery warranty. Provides Ideal UPS Backup in Healthcare Facilities Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise Battery Backup and Full Surge Protection 27.5 minutes runtime for half load (375W); 11 minutes for full load (750W) All six hospital-grade outlets provide surge protection rated to 340 joules EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference Resistant to electrostatic discharge LEDs and Audible Alarms Keep You Aware of Power Status Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning Audible alarms alert you to power failure, overload and low battery conditions; the alarm’s mute/quiet mode ensures patients are not disturbed Saves Your Files, Even When You’re Away Works with Tripp Lite PowerAlert software (included) to enable safe, unattended system shutdown and files saves during prolonged power failures Connects to your computer via either the DB9 port or USB port,

Power
Output power	750 W
Input operation voltage (min)	230 V
Input operation voltage (max)	230 V
Output operation voltage (min)	230 V
Output operation voltage (max)	230 V
Surge energy rating	340 J
Maximum current	10 A
Output power capacity	1 kVA
Performance
LED indicators	Yes
EMI/RFI noise filtering	Yes
Surge protection	Yes
Power protection features	Over voltage, Under voltage
Audible alarm(s)	Yes
Features
Country of origin	China
Output power	750 W
Input operation voltage (min)	230 V
Input operation voltage (max)	230 V
Output operation voltage (min)	230 V
Output operation voltage (max)	230 V
Surge energy rating	340 J
Maximum current	10 A
EMI/RFI noise filtering	Yes
Surge protection	Yes
Power protection features	Over voltage, Under voltage
Audible alarm(s)	Yes
Output power capacity	1 kVA
Input frequency	50/60 Hz
Ports & interfaces
AC outlets quantity	6 AC outlet(s)
AC outlet types	C13 coupler
Power plug	C14 coupler
Battery
Battery recharge time	4.5 h
Typical backup time at half load	27.5 min
Typical backup time at full load	11 min
Hot-swap battery	Yes
Cold start	Yes
Design
Country of origin	China
Form factor	Tower
LED indicators	Yes
Product colour	White
Certification	CE, IEC 60601-1
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	0 - 95%
Technical details
Harmonized System (HS) code	85078000
Weight & dimensions
Package width	309.9 mm
Package depth	339.9 mm
Package height	469.9 mm
Weight	20.6 kg
Width	190.5 mm
Package weight	22.1 kg
Height	322.6 mm
Depth	229.9 mm
Packaging data
Package width	309.9 mm
Package depth	339.9 mm
Package height	469.9 mm
Package weight	22.1 kg
Logistics data
Products per master (outer) case	1 pc(s)
Master (outer) case width	309.9 mm
Master (outer) case length	339.9 mm
Master (outer) case height	469.9 mm
Master (outer) case gross weight	22.1 kg
Certificates
Certification	CE, IEC 60601-1
Other features
Interface	USB; DB9