HPE 5120 8G PoE+ (180W) SI Managed L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Grey

5120 8G PoE+ (180W) SI Switch

Description

The HPE FlexNetwork 5120 SI Switch Series are Layer 2 switches that support stacking, static Layer 3 routing, PoE+, ACLs and IPv6. They are campus switches ideal for medium and large enterprise networks. HPE Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing four switches as one logical device, which increases network resilience, performance, and availability while reducing operational complexity. The FlexNetwork 5120 SI Switch Series can be managed with HPE Intelligent Management Center (IMC) Software for a single view of your entire network.

What's new
- HPE FlexNetwork managed Layer 2 gigabit Ethernet switch series with L3 static routing.
- PoE+ models for phones, cameras and wireless APs.
- Compact 8 port models with 65 or 180 Watts of PoE+ power.
- Single view of the network with IMC.

Features

Managed Access Layer Switches
- The HPE FlexNetwork 5120 SI Switch Series is ideal for medium and large enterprises looking for a traditional, scalable, fully managed Layer 2 access switch with static IP routing, PoE+, ACLs, IPv6, and support for stacking.
- The HPE Intelligent Resilient Framework (IRF) virtualizes up to four physical switches into one logical device for simpler, flatter, more agile networks.
- PoE+ models support up to 370 W of PoE/PoE+ power for phones, cameras and wireless access points; up to 720 W available on the 24-port model with optional accessories.
- Right size deployment with 8-, 16-, 24-, and 48-port gigabit Ethernet models that include up to 4 SFP ports for fiber uplinks.

Advanced Quality of Service (QoS)
- The HPE FlexNetwork 5120 SI Switch Series delivers a better application experience with classifier-based QoS using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per port basis.
- Network traffic prioritization with multiple congestion methods include: strict priority (SP) queuing, SDWRR, and SP+WRR.

Security Control
- The HPE FlexNetwork 5120 SI Switch Series supports hardware-based wire-speed access control lists (ACLs) for enhanced security and ease of administration without impacting network performance.
- RADIUS/HWTACACS, SSL, Port Security, and 802.1x and MAC-based authentication deliver enhanced security.

Single View of the Network
- The HPE FlexNetwork 5120 SI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) Software to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
- Remote Network Monitoring (RMON) provides advanced monitoring and reporting capabilities for statistics, history, alarms and events.
- Separate data and control paths: increases security and performance
- Spanning Tree/MSTP, RSTP: provides redundant links while preventing network loops
- IEEE 802.3ad Link Aggregation Control Protocol (LACP): supports up to 26 trunks, each with 8 links per trunk; supports static or dynamic groups
- Smart link: allows 50 ms failover between links
- Intelligent Resilient Framework (IRF): creates virtual resilient switching fabrics, where two or more switches perform as a single Layer 2 switch and Layer 3 router; switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using standard LACP for automatic load balancing and high availability; simplifies network operation by eliminating the complexity of Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP
- 8K MAC address table: provides access to many Layer 2 devices
- VLAN support and tagging: support IEEE 802.1Q with 4,094 simultaneous VLAN IDs
- IP multicast snooping: automatically prevents flooding of IP multicast traffic
- Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping: effectively control and manage the flooding of multicast packets in a Layer 2 network

Specifications

Management features
Switch type	Managed
Web-based management	Yes
Quality of Service (QoS) support	Yes
Switch layer	L2
Ports & interfaces
SFP module slots quantity	1
Basic switching RJ-45 Ethernet ports quantity	8
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Installed SFP modules quantity	0
Installed SFP+ modules quantity	0
Console port	RJ-45
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Network
Auto-sensing	Yes
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u
Full duplex	Yes
VLAN support	Yes
Flow control support	Yes
Broadcast storm control	Yes
Auto MDI/MDI-X	Yes
10G support	No
IGMP snooping	Yes
Data transmission
Throughput	13.4 Mpps
Latency (1 Gbps)	3 µs
Packet buffer memory	0.5 MB
MAC address table	8192 entries
Switching capacity	18 Gbit/s
Jumbo frames support	Yes
Security
IGMP snooping	Yes
Access Control List (ACL)	Yes
DHCP features	DHCP client
Design
Form factor	1U
Product colour	Grey
Stackable	Yes
Rack mounting	Yes
Performance
Memory type	SDRAM
Internal memory	128 MB
Flash memory	128 MB
Packet buffer memory	0.5 MB
Stackable	Yes
Power
Power supply included	No
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	230 W
Power source	AC
Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget	180 W
Power over Ethernet (PoE)	Yes
Operational conditions
Storage temperature (T-T)	-40 - 70 °C
Storage relative humidity (H-H)	5 - 95%
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90%
Heat dissipation	163 BTU/h
Virtual LAN features
VLAN support	Yes
Weight & dimensions
Width	300 mm
Depth	260 mm
Height	43.6 mm
Weight	3 kg
Technical details
Form factor	1U
Product colour	Grey
Stackable	Yes
Rack mounting	Yes
Memory
Packet buffer memory	0.5 MB
Memory type	SDRAM
Internal memory	128 MB
Flash memory	128 MB